Faults in Blow Room: Causes and Remedies
Blow Room: Blow room is the first steps in spinning. The main object of blow room is to open and loosen the matted mass of bale cotton and to remove …
Defects
Problems in Dyeing with Reactive Dyes, Direct Dyes, Sulphur Dyes and Vat Dyes
Dyeing Problems: There are a number of problems of the reproducibility and difficulties in obtaining right first time dyeing. Two important aspects of dyeing, namely dye variables and system variables, …
Investigation on the Defects Found in the Different Types of Samples by Buyer in a RMG Industry
Investigation on the Defects Found in the Different Types of Samples by Buyer in a RMG Industry Authors: Mosiur Rahman1 Hamid Hussain Azad Dept. of Textile Engineering Daffodil International University, …
Sewing Fault and Measurement Variation for Short Sleeve T-Shirt
Study on Sewing Fault and Measurement Variation for Short Sleeve T-Shirt Authors: Md. Nawaz Morshed1 Md. Sajuman Al Sajjad Md. NazimUddin Dept. of Textile Engineering Daffodil International University, Dhaka, Bangladesh …
Sewing Defects Causes and Remedies in Apparel Industry
Sewing Defects: In order to get the correct appearance and good performance of seams, various considering factors, such as, stitch, seam, feed system, needle, thread, etc. Have to be correctly …
Common Woven Fabric Defects with Pictures
Defects in Fabrics: There are various types of defects in fabrics which may be created during weaving of fabrics or may be created during dyeing, finishing after weaving. Fabric defects …